2 Ton Fixed Type Motorized Chain Hoist for Bangladesh Customer

2 sets 2 Ton Fixed Type electric motorized chain hoist for Bangladesh Customer. In the beginning, except this 2 sets hook suspension type electric motorized chain hoist, Our Bangladesh customer also needs spare parts for their existing chain hoists from other brand. After communicating with our customer, I just quoted for him 2 ton hook suspension type electric motorized chain hoist. Check the 2 ton fixed type electric motorized chain hoist case to learn more hoist knowledge.

2  Ton  Fixed Type electric motorized chain hoist

2 Sets 2 Ton electric motorized chain hoist

2 Ton Fixed Type Electric Chain Hoist for Bangladesh Customer

2 sets 2 Ton Fixed Type electric motorized chain hoist Specification

• Lifting Capacity: 2 Ton

• Lifting Height: 10m

• Voltage: 405V50HZ3Phase

Our customer sent me this hoist inquiry with spare parts from other brand at first,

"Spare parts for USS 0200S

• a. Brake dish for cast iron (Part code-507S) ---- 4 Pcs.

• b. Load chain wheel (Part code-173S) ----------- 4 Pcs.

• c. Chain guide cover (Part code-189S) ----------- 6 Pcs

• d. Chin guide assembly (Part code-210S) ------- 3 Pcs.

• e. Chain limit plate assembly (Part code- 196S) ---- 2 Pcs."

But I only quoted for him 2 sets fixed type electric motorized chain hoists, and told him if he can accept our spare parts of chain hoist, I can quote for him.

After the customer checked the quotation I sent, he asked me to quote him the electric trolley electric motorized chain hoist with spare parts and fixed type electric motorized chain hoist with spare parts for reference. But in the end, the customer asked me to quote for him fixed type electric motorized chain hoist without spare parts

"Fixed Type Electrical Chain Hoist

Quantity : 02 Sets

Please indicate detail specification with model number and other details and do not mention the spare parts in the quotation ."

Then we quoted for type electric motorized chain hoist as their request, and our customer was very satisfied with our chain hoist products and price.

Then our customer told us the customs clearance documents that they need and confirm the consignee information.

2 ton Fixed Type electric motorized chain hoist Production and Packaging

After 10 days production, these 2 sets 2 ton fixed type electric motorized chain hoist were finished, then we sent the finished hoist pictures of 2 ton electric motorized chain hoists to our customers for checking.

2  Ton Fixed Type electric motorized chain hoist Packaging

Causes and Solutions of the Failure of the Fixed Type electric motorized chain hoist

After the fixed electric motorized chain hoist has been used for a period of time, some faults such as broken cables, burnt out of the contactor contacts, and unscrewing of the motor shaft may be caused due to some bad operations and usage methods. The following electric motorized chain hoist manufacturers Let me teach you how to solve these problems when the electric hoist fails.

Fault 1: The operating cable is broken. The reason is the fatigue and aging of the cable material after repeated cycles of stress.

Fault 2: The contactor of the contactor is burnt out. The reason is: the actual passing current is too large. For general motors, the working current is less than the rated current. Although the starting current reaches 4-6 times the rated current, the time is very short after all, and the damage to the contacts is not large. This factor has been considered in the design of the contactor, so the control Its contact capacity is 1.25 times larger than the rated current of the motor. But the electric motorized chain hoist motor is a special working state motor, heavy load frequent start and stop, reverse braking, dynamic braking, poor heat dissipation and so on. Therefore, when the electric hoist contactor is selected, according to the general motor design, it does not meet the requirements of the electric hoist working condition, and the contactor burns out as an inevitable result. In addition, during the conversion process, the oppositely controlled contactor can easily cause phase-to-phase short circuit due to arc freewheeling.

Fault 3: The motor shaft end is twisted off. The reason is mechanical shock, of which the shock produced by reverse braking is the largest.

Fixed type electric motorized chain hoists have different faults and their solutions are different, so we have to prescribe the right medicine and use different solutions for different situations. If you have concerns about the use of electric motorized chain hoists, you can contact us at any time!

Dejun Crane can customize the chain hoist according to your working condition and requirements. We not only can supply fixed type electric motorized chain hoist but also electric trolley type electric motorized chain hoist, manual trolley type electric motorized chain hoist, and we also supply manual chain hoist, so if you have need about the chain hoist, please contact us freely, we will supply you the most suitable chain hoist.